You are here: Home » Blog » How to Operate Procedure of Laser Cutting Machine

How to Operate Procedure of Laser Cutting Machine

Views:31     Author:Site Editor     Publish Time: 2021-02-19      Origin:Site

1. Before use, please check whether the power supply voltage is consistent with the machine's rated voltage to avoid unnecessary damage.

 

2. Check whether the exhaust pipe is located at the air outlet to avoid blocking air convection.

 

3. Check whether there are other foreign objects in the machine table.

 

metal fiber laser cutting machine


Operation steps of laser cutting machine

 

1. Fix the cutting material. Fix the material to be cut on the worktable of the laser cutting machine.

2. Adjust the equipment parameters according to the material and thickness of the metal plate.

3. Select the appropriate lens and nozzle, and check before starting to check their integrity and cleanliness.

4. Adjust the focus. Turn the cutting head to the correct focus position.

5. Check and adjust the nozzle center.

6. Calibration of the cutting head sensor.

7. Choose a suitable cutting gas and check whether it is intact.

8. Try to cut the material. After cutting the material, check whether the cutting end surface is smooth and check the cutting accuracy. If there are any errors, please adjust the equipment parameters accordingly until the proofreading meets the requirements and is acceptable.

9. Program the drawing of the workpiece, make corresponding layout, and import the equipment cutting system.

10. Adjust the position of the cutting head and start cutting.

11. During the operation, the staff should always be present and carefully observe the cutting situation. In an emergency, they should respond quickly and press the emergency stop button.

12. Check the cutting quality and accuracy of the first sample.

 


Product Category

Get In Touch

Email: info@raymaxlaser.com
Tel: 0086-555-6767999
Cell: 0086-17755591284
         0086-18855564958

Contact Us

ABOUT ANHUI ZHONGRUI

We are dedicated to the R&D and manufacturing of medium or high -level processing equipments and press lines for punching, shearing, press brake and laser cutting of metal plates.
0086-555 6767999
  0086-17755591284
  0086-18855564958
 info@raymaxlaser.com

WHERE TO FIND US

SITE NAVIGATION

PRODUCT CATEGORIES

FOLLOW US

Contact us
Copyright © Anhui Zhongrui Machine Manufacturing Co., Ltd. All Rights Reserved.